Cd-1 Marine Ignition Kit w/o USB – 103003A

Description

Cd-1 Marine Programmable Ignition Kit (without USB adapter) p/n 103003A

Simple to install and configure, perfect for ALL big-block and small-block marine engines that utilize a distributor.

Notes:

This kit does not include the USB Interface (part number 102004) and is designed for budget users who do not plan on setting up or adjusting the optional features.

You can use this ignition system directly out of the box without any PC programming if connecting to a locked-out, mechanical, or vac advance distributor (points, TFI, or magnetic pickup).

Items included in the Cd-1 Marine Programmable Ignition kit:

–  CD-1 Marine Programable ignition module p/n 103001, CD-1 ignition coil p/n 103002, CD-1 Marine 12-pin wire harness, instructions and parts bag.

Parts bag: power and ground terminals (2), coil terminals (2), single-pin weather pack male shell and terminal (1), single-pin weather pack female shell and terminal (1), seals (2) optional diodes that are used when connecting inputs to solenoid type coils.

• 135mj of spark energy output
• rpm limit – 3000 rpm(min) and 9,900 rpm(max) adjustable in 100 rpm increments
• waterproof – encapsulated construction
• wiring – 12-pin waterproof harness
• compatible – All 8-4-6 cylinder even fire engines that utilize points, magnetic pickup distributor, four magnet crank trigger, Ford TFI or ECU trigger
• compact –  Ignition Module: 9.375″ L x 3.625″ W x 2.75″ H. —  Coil: 4.4″ L  x 3.2″ W x 3″ H
• efficient – Less than 5A current draw at 8000 rpm
• designed for 16v power systems (8-20v) and reverse polarity protected
• start timing retard is user configurable – up to 10 degrees of starting spark retard
• built-in data logging – stores 5 hours of data at 10 samples/sec or 30 minutes of data at 100 samples/sec
• optional – dedicated input for timing retard (up to 18 degrees – adjust via switch)
• optional – dedicated input for manifold pressure input (configure via our simple to use software)
• optional – configurable inputs/output that can be programmed as a RPM Window Switch (Nitrous) or it can monitor/log a 0-5v sensor
• options – two additional user configurable inputs that can be setup to monitor/log two 0-5v sensors.
• requires optional USB interface kit p/n 102004 to communicate and configure optional features
• simple to configure with our easy to navigate software (windows)

Additional Information:

Instructions: https://jmschip.com/content/CD1/103003_CD1_Marine_Instructions.pdf

CD1 Product Version Differences and Details: https://jmschip.com/content/CD1/23-09_CD1-COMPARE.pdf

Ignition BOX CD1 Mounting Template: https://jmschip.com/content/CD1/CD1_new_mount_template.PDF

Catalog: https://jmschip.com/content/JMS_Catalog_Web.pdf