Fuelmax – P2020PPS20

Description

PowerMAX V2 FuelMAX 22 Volt/44 and Universal Splice-In Voltage Booster

Increase the output of any electric fuel pump by up to 85 percent! Why replace your fuel pump when you can reliably increase its output with FuelMAX V2? In fact, using FuelMAX V2, you can quickly and easily enhance your stock fuel pump’s output!

The FuelMAX V2 upgrades include: a new case, higher output, and even more features than before!

FuelMAX V2 boosts and regulates voltage on all vehicles, ranging from 14.4 volts to the max output of 22 volts. Moreover, it supports up to 1000 horsepower with a single pump and 1350 horsepower with the stock dual pumps!

Furthermore, FuelMAX V2 is proudly designed and assembled in the U.S.A.

Simple installation: FuelMAX splices into your existing fuel pump’s +12V DC feed wire. It is compatible with all 12V or 16V battery systems, making it an ideal choice for a wide variety of vehicles.

Works on all Ford vehicles: Whether you drive a domestic or import vehicle, or even a race car with factory in-tank or external electric fuel pumps, FuelMAX V2 is the perfect solution. It also works seamlessly with aftermarket fuel pumps, such as Weldon, Aeromotive, and Holley.

High-quality user-adjustable Hobbs switch: The preset is 5 psi but is user-adjustable from 3 psi to 7 psi. Alternatively, it can use an accelerator pedal activation harness depending on your product application.

Eliminate fuel pressure spikes with ease! The adjustable voltage ramp-in and ramp-out options allow you to choose either a timed ramp or one from a monitored 0-5V sensor.

Additionally, the green status LED lets you know at a glance what the unit is doing. A blinking LED indicates when the unit is boosting voltage.

installation kit contains:

Each FuelMAX V2 kit contains: 44 and PowerMAX V2 voltage booster wiring harness installation kit and set of instructions.

1 – hobbs switch preset 5psi (user adjustable 3-7psi) 1 – fitting 1/8npt female to 3/16 male barb 1 – vacuum tee 3/16 x 3/16 x 3/16 1 – vacuum tee 1/4 x 1/4 x 3/16 1 vacuum tee 3/8 x 3/8 x 3/16 1 foot of 5/32 vacuum hose 1 – 30and mini-fuse solder 2 – 10/12gauge heat shrink butt splices 2 – 8 stud 18/22 gauge wire heat shrink ring terminal 1 &ndash 10-gauge heat shrink ring terminal 6 – zip ties 6 – self drilling hex screws and mini screw-driver.

Additional Information:

Instructions: https://jmschip.com/content/PowerMAX_V2/PM2000-PPM11_PM2020-PPS11_Install_V11_WEB.pdf

Brochure: https://jmschip.com/content/PowerMAX_V2/PowerMAXv2_Technical_Info_WEB.pdf

Catalog: https://jmschip.com/content/JMS_Catalog_Web.pdf